JBL Club 605CSQ 6 Inch 2 Way Component Car Speakers
₹19,490.00Original price was: ₹19,490.00.₹17,100.00Current price is: ₹17,100.00.
The JBL Club 605CSQ is a 2 way component speaker system for owners who want clearer, more accurate sound than factory door speakers can give. It pairs a carbon fiber woofer with an edge driven silk dome tweeter, and it is rated at 285W peak and 95W RMS. The tweeter is a separate unit, so it can be mounted higher up, behind a factory grille or on the A pillar, which lifts the sound stage compared with a speaker that has everything in one cone. Carbon and Chrome fits these speakers for customers across Viman Nagar and nearby Pune localities, and checks that they suit your car’s door speaker size before installation.
2 way component speaker system with separate woofer and tweeter
Carbon fiber woofer for accurate, clear sound
Plus One cone design, which gives more cone area than a regular speaker of the same size and brings louder bass
Edge driven silk dome tweeter, for a smooth high frequency response that stays free of harshness at higher volumes
Adjustable tweeter output of 0dB or +3dB, to balance the sound for where the tweeter is mounted
Y40 ferrite magnet for higher sensitivity than a standard Y30 magnet
Starfish tweeter mounting adapter with six break off mounting tabs, for installing behind factory grilles or on the A pillar
I-Mount tweeter mounting kit with flush cup and surface mount hardware
Tweeter can be flush mounted or surface mounted, and angled up to 40 degrees either way
Tweeter can be serviced or replaced without removing the whole assembly
285W peak and 95W RMS power rating
Specifications
Specification
Detail
Brand
JBL
Model
Club 605CSQ
Type
2 way component speaker system
Woofer size
6 inch
Woofer material
Carbon fiber, Plus One design
Tweeter
Edge driven silk dome
Tweeter output level
0dB or +3dB, adjustable
Magnet
Y40 ferrite
Power handling
285W peak, 95W RMS
Tweeter mounting
Starfish adapter, I-Mount kit (flush or surface)
Tweeter cutout
1 3/4 inch
Tweeter mounting depth
1 inch
Tweeter angle
Up to 40 degrees either way
Fitment
These speakers need to match the speaker size and mounting points in your car’s doors. Some cars take them directly, and others need mounting brackets or spacers, so enquire on WhatsApp with your car model and we’ll confirm fitment before booking your fitting slot. We also check the tweeter position, because the best spot differs between cars.
Why Get It Installed at Carbon and Chrome
Our accessories team, led by Shadab, fits car audio and infotainment daily. A component speaker only sounds as good as its installation, and tweeter placement, door sealing and wiring all affect the result. Because the tweeter is adjustable, we set its position and output level for your car. You’re welcome to visit our Viman Nagar studio and talk it through before you decide.
Frequently Asked Questions
What does “component” mean on a speaker?
A component set has a separate woofer and tweeter. The tweeter can be mounted away from the woofer, such as on the A pillar, which usually gives clearer vocals and a wider sound stage than a single cone speaker.
Do I need an amplifier for the JBL Club 605CSQ?
The speakers are rated at 95W RMS, which is more than most car stereos supply on their own. They will play from a stereo, but pairing them with an amplifier lets you use more of their rating. Ask us on WhatsApp and we’ll suggest what suits your setup.
What does the adjustable tweeter level do?
It lets you set the tweeter output to 0dB or +3dB. A tweeter mounted low in the door sounds different from one on the A pillar, and this switch helps balance the sound for either position.
Can I mount the tweeter behind the factory grille?
Yes. The Starfish adapter is designed for mounting behind factory grilles or on the A pillar, with six break off tabs to suit different positions.
Will they fit my car?
In most cars with a standard door speaker slot, yes, sometimes with brackets or spacers. We confirm this on WhatsApp before booking your fitting slot.
How long does installation take?
A pair of front component speakers usually takes a few hours, depending on your car model and where the tweeters go.
Reviews
There are no reviews yet.